No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an SVF System

Configuring an SVF System

NOTE:

The following describes the basic configuration process, which is for your reference only. For the detailed configuration process and precautions, see the configuration guide in the product documentation.

In a super virtual fabric (SVF) system, both the parent and leaf switches can be CE8800&7800&6800&5800 series switches.

Configuring an SVF System of Fixed Switches

  1. (Optional) Set up a stack between parent switches. For details, see Configuring a Stack.

  2. Configure the domain ID for a parent switch. If a stack has been set up between parent switches, skip this step because the domain ID has been set during the stack configuration.

    <HUAWEI> system-view
    [~HUAWEI] stack
    [~HUAWEI-stack] stack member 1 domain 10
    [*HUAWEI-stack] commit
    [~HUAWEI-stack] return
    <HUAWEI> save
    
  3. Configure a fabric port on the parent switch.

    <HUAWEI> system-view
    [~HUAWEI] interface fabric-port 1
    [*HUAWEI-Fabric-Port1] port bind member 101
    [*HUAWEI-Fabric-Port1] port member-group interface 10ge 1/0/1 to 1/0/2
    [*HUAWEI-Fabric-Port1] quit
    [*HUAWEI] commit
    
  4. (Optional) Configure the working mode and uplink port type of a leaf switch.

    <HUAWEI> system-view
    [~HUAWEI] stack
    [~HUAWEI-stack] switch mode leaf member 1      //Configure the working mode.
    [~HUAWEI-stack] leaf uplink-port type 4*10ge member 1      //Configure the uplink port type.
    

    After the working mode or uplink port type is configured, restart the switch.

  5. Connect parent and leaf switches.

Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 139189

Downloads: 3153

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next