No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting Interface-based Rate Limiting Configuration

Deleting Interface-based Rate Limiting Configuration

Deleting the Interface-based Rate Limiting Configuration in the Inbound Direction

Unbind the QoS CAR profile qoscar1 from 10GE1/0/1 and delete the profile.

<HUAWEI> system-view
[~HUAWEI] interface 10ge 1/0/1
[~HUAWEI-10GE1/0/1] undo qos car inbound
[*HUAWEI-10GE1/0/1] quit
[*HUAWEI] undo qos car qoscar1
[*HUAWEI] commit

Deleting the Interface-based Rate Limiting Configuration in the Outbound Direction

Run the undo qos lr [ outbound ] command in the interface view to delete the interface-based rate limiting configuration.

Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 123339

Downloads: 3136

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next