No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an Observing Port

Configuring an Observing Port

Observing ports must be configured before you configure mirroring functions.

  • Configuring a Single Observing Port

    <HUAWEI> system-view
    [~HUAWEI] observe-port 1 interface 10ge 1/0/1
    [*HUAWEI] commit
  • Configuring an Observing Port Group (Applicable Only to the CE12800 (except the CE12800E) or CE6870EI/CE6875EI)

    An observing port group consists of multiple member ports. When an observing port group is configured for packet mirroring, packets on the mirrored port are copied to all the member ports of the observing port group.

    <HUAWEI> system-view
    [~HUAWEI] observe-port group 1
    [*HUAWEI-observe-port-group-1] group-member 10ge 1/0/1 to 10ge 1/0/4
    [*HUAWEI-observe-port-group-1] commit
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 195904

Downloads: 3214

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next