No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RADIUS Authentication

Configuring RADIUS Authentication

Configure RADIUS authentication on CE series switches as follows:

<HUAWEI> system-view
[~HUAWEI] radius enable  //Enable the RADIUS protocol.
[*HUAWEI] radius server group shiva  //Create a RADIUS server group and enter the RADIUS server group view.
[*HUAWEI-radius-shiva] radius server shared-key-cipher Huawei@2012  //Set the shared key for the RADIUS server.
[*HUAWEI-radius-shiva] radius server authentication 10.7.66.66 1812  //Configure the IP address and port number of the RADIUS authentication server.
[*HUAWEI-radius-shiva] radius server accounting 10.7.66.66 1813  //Configure the IP address and port number of the RADIUS accounting server.
[*HUAWEI-radius-shiva] commit
[~HUAWEI-radius-shiva] quit
[~HUAWEI] aaa
[~HUAWEI-aaa] authentication-scheme auth  //Create an authentication scheme and enter the authentication scheme view.
[*HUAWEI-aaa-authen-auth] authentication-mode radius  //Set the authentication mode to RADIUS authentication.
[*HUAWEI-aaa-authen-auth] commit
[~HUAWEI-aaa-authen-auth] quit
[~HUAWEI-aaa] accounting-scheme abc  //Create an accounting scheme and enter the accounting scheme view.
[*HUAWEI-aaa-accounting-abc] accounting-mode radius  //Set the accounting mode to RADIUS accounting.
[*HUAWEI-aaa-accounting-abc] commit
[~HUAWEI-aaa-accounting-abc] quit
[~HUAWEI-aaa] domain huawei  //Create a domain and enter the domain view.
[*HUAWEI-aaa-domain-huawei] authentication-scheme auth  //Configure the authentication scheme for the domain.
[*HUAWEI-aaa-domain-huawei] accounting-scheme abc  //Configure the accounting scheme for the domain.
[*HUAWEI-aaa-domain-huawei] radius server group shiva  //Configure the RADIUS server group for the domain.
[*HUAWEI-aaa-domain-huawei] commit
[~HUAWEI-aaa-domain-huawei] quit
[~HUAWEI-aaa] quit
[~HUAWEI] quit
Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 139442

Downloads: 3153

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next