No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Stack Priority of a Member Switch

Modifying the Stack Priority of a Member Switch

During master switch election in a stack, the member switch with a higher stack priority becomes the master switch.

After setting a stack priority, restart the switch for the configuration to take effect.

Modifying the Stack Priority of a CE12800&12800E

  • Before stack is enabled

    <HUAWEI> system-view
    [~HUAWEI] stack
    [~HUAWEI-stack] stack priority 150
    [*HUAWEI-stack] commit
    
  • After stack is enabled

    <HUAWEI> system-view
    [~HUAWEI] stack
    [~HUAWEI-stack] stack member 1 priority 150
    [*HUAWEI-stack] commit
    

Modifying the Stack Priority of a CE8800&7800&6800&5800

<HUAWEI> system-view
[~HUAWEI] stack
[~HUAWEI-stack] stack member 1 priority 150
[*HUAWEI-stack] commit
Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 193518

Downloads: 3212

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next