No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an Eth-Trunk to Transparently Transmit Packets from a VLAN

Configuring an Eth-Trunk to Transparently Transmit Packets from a VLAN

Run the port link-type { access | hybrid | trunk } command in the Eth-Trunk interface view to configure the link type of the interface and add the interface to a VLAN. Then the Eth-Trunk can transparently transmit packets from the VLAN.

# Configure Eth-Trunk 2 as a trunk interface and configure it to transparently transmit packets from VLAN 2.
<HUAWEI> system-view
[~HUAWEI] vlan batch 2    //Create VLAN 2.
[*HUAWEI] interface eth-trunk 2    //Create Eth-Trunk 2.
[*HUAWEI-Eth-Trunk2] trunkport 10ge 1/0/1
[*HUAWEI-Eth-Trunk2] port link-type trunk
[*HUAWEI-Eth-Trunk2] port trunk allow-pass vlan 2    //Add Eth-Trunk 2 to VLAN 2.
[*HUAWEI-Eth-Trunk2] commit
Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 192627

Downloads: 3212

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next