No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling User Name Length Check

Disabling User Name Length Check

By default, security policy is enabled for the local account to ensure security. The policy requires that a local user name length be at least six characters.

If the minimum length is specified for the local user name, the switch also checks user name length.

To disable user name length check, run the following commands:
<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] undo local-user policy security-enhance       //Disable security policy for the local account.
[*HUAWEI-aaa] undo user-name minimum-length       //If user name length check has been enabled, disable user name length check.
[*HUAWEI-aaa] commit
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 196344

Downloads: 3214

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next