No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Stack

Configuring a Stack

NOTE:

The following example describes basic stack configurations. For details, see the related product configuration manual.

Configuring Stack on CE12800&12800E Series Switches

<HUAWEI> system-view
[~HUAWEI] stack
[~HUAWEI-stack] stack member 1      //Set a stack member ID.
[*HUAWEI-stack] stack priority 150      //Set the stack priority.
[*HUAWEI-stack] stack domain 10       //Configure a stack domain ID.
[*HUAWEI-stack] stack link-type mainboard-direct      //Configure the stack connection mode.
[*HUAWEI-stack] quit
[*HUAWEI] commit
[~HUAWEI] port-group group1
[*HUAWEI-port-group-group1] group-member 10ge 1/0/1 to 10ge 1/0/2
[*HUAWEI-port-group-group1] group-member 10ge 2/0/1 to 10ge 2/0/2
[*HUAWEI-port-group-group1] shutdown      //Shut down the physical member port to be added to a logical stack port.
[*HUAWEI-port-group-group1] quit
[*HUAWEI] commit
[~HUAWEI] interface stack-port 1      //Create a logical stack port.
[*HUAWEI-Stack-Port1] port member-group interface 10ge 1/0/1 to 1/0/2      //Add physical member ports to the logical stack port.
[*HUAWEI-Stack-Port1] port member-group interface 10ge 2/0/1 to 2/0/2
[*HUAWEI-Stack-Port1] quit
[*HUAWEI] commit
[~HUAWEI] port-group group1
[~HUAWEI-port-group-group1] undo shutdown      //Open the shutdown physical member ports.
[*HUAWEI-port-group-group1] quit
[*HUAWEI] commit
[~HUAWEI] quit
<HUAWEI> save      //Save the configuration.
Warning: The current configuration will be written to the device. Continue? [Y/N]: y
<HUAWEI> system-view
[~HUAWEI] stack
[~HUAWEI-stack] stack enable      //Enable the stack function.
Warning: Make sure that one or more dual-active detection methods are configured once the conversion is complete and the device ente
rs the stack mode.
Current configuration will be converted to the next startup saved-configuration file of stack mode.
System will reboot. Continue? [Y/N]: y

Configuring Stack on CE8800&7800&6800&5800 Series Switches

<HUAWEI> system-view
[~HUAWEI] stack
[~HUAWEI-stack] stack member 1 renumber 2 inherit-config      //Set a stack member ID.
Warning: The stack configuration of member ID 1 will be inherited to member ID 2 after the device resets. Continue? [Y/N]: y
[*HUAWEI-stack] stack member 1 priority 150      //Set the stack priority.
[*HUAWEI-stack] stack member 1 domain 10       //Set a stack domain ID.
[*HUAWEI-stack] quit
[*HUAWEI] commit
[~HUAWEI] port-group group1
[*HUAWEI-port-group-group1] group-member 10ge 1/0/1 to 10ge 1/0/4
[*HUAWEI-port-group-group1] shutdown      //Shut down the physical member port to be added to a logical stack port.
[*HUAWEI-port-group-group1] quit
[*HUAWEI] commit
[~HUAWEI] interface stack-port 1/1      //Create a logical stack port.
[*HUAWEI-Stack-Port1/1] port member-group interface 10ge 1/0/1 to 1/0/2
[*HUAWEI-Stack-Port1/1] quit
[*HUAWEI] interface stack-port 1/2
[*HUAWEI-Stack-Port1/2] port member-group interface 10ge 1/0/3 to 1/0/4
[*HUAWEI-Stack-Port1/2] quit
[*HUAWEI] commit
[~HUAWEI] port-group group1
[~HUAWEI-port-group-group1] undo shutdown      //Open the shutdown physical member ports.
[*HUAWEI-port-group-group1] quit
[*HUAWEI] commit
[~HUAWEI] quit
<HUAWEI> save      //Save the configuration.
Warning: The current configuration will be written to the device. Continue? [Y/N]: y
<HUAWEI> reboot      //Restart the device.
Warning: The system will reboot. Continue? [Y/N]: y
Translation
Download
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 122156

Downloads: 3136

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next