No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a DHCP Server

Configuring a DHCP Server

Configure a DHCP server on a CE series switch as follows:

<HUAWEI> system-view
[~HUAWEI] dhcp enable //Enable DHCP globally.
[*HUAWEI] commit
[~HUAWEI] ip pool pool1 //Create a global address pool and enter the global address pool view.
[*HUAWEI-ip-pool-pool1] gateway-list //Configure the egress gateway address for the global address pool on the DHCP server.
[*HUAWEI-ip-pool-pool1] network mask //Configure the range of IP addresses that can be allocated dynamically.
[*HUAWEI-ip-pool-pool1] commit
[~HUAWEI-ip-pool-pool1] quit
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 236299

Downloads: 3262

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next