No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Common Operation Guide

CloudEngine 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Network Type of an Interface

Configuring the Network Type of an Interface

The network types of OSPF interfaces on both ends of a link must be the same; otherwise, route calculations may be incorrect.

# Configure the network type for an interface.

<HUAWEI> system-view
[~HUAWEI] interface 10ge 1/0/1
[~HUAWEI-10GE1/0/1] undo portswitch
[*HUAWEI-10GE1/0/1] ospf network-type nbma  //Set the network type of interface 10GE1/0/1 to NBMA.
[*HUAWEI-10GE1/0/1] commit
Updated: 2018-10-08

Document ID: EDOC1000102369

Views: 144487

Downloads: 3160

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next