No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor UltraPath for vSphere V100R008C50 User Guide 06

This document covers the functions, features, installation, configuration, upgrade, uninstallation, maintenance, troubleshooting, and FAQs of OceanStor UltraPath for vSphere (UltraPath forvSphere). UltraPath for vSphere is the multipathing software developed by HuaweiTechnologies Co., Ltd (Huawei for short). The document aims at helping users to be fully familiar with UltraPath for vSphere and its use.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging in to the CLI Locally

Logging in to the CLI Locally

This section describes how to log in to the CLI of UltraPath for vSphere.

Function

The esxcli upadm command is used to log in to the command-line interface (CLI) of UltraPath for vSphere.

NOTE:
All UltraPath for vSphere commands start with esxcli upadm, such as esxcli upadm show version. The description of esxcli upadm is not provided in the other parts of the document.

This document uses local CLI login as an example.

Format

esxcli upadm

Parameters

None

Level

User root

Usage Guidelines

Log in to the vSphere CLI management interface, run esxcli upadm show version to check the version of UltraPath for vSphere.

~ # esxcli upadm show version
Software Version : 8.06.010
Driver   Version : 8.06.010

Example

To use the UltraPath CLI, log in to the vSphere CLI management interface from a local PC.

~ # esxcli upadm
Usage: esxcli upadm {cmd} [cmd options]

Available Namespaces:
  set                   Set UltraPath settings.
  check                 Check UltraPath settings.
  clear                 Clear UltraPath settings.
  show                  Display UltraPath information.
  start                 Start UltraPath operations.

System Response

The following table explains some parameters in the command output:

Parameter

Description

Default Value

set

The esxcli upadm set command is used to display settings-related commands of UltraPath for vSphere.

None

check

The esxcli upadm check command is used to display check-related commands of UltraPath for vSphere.

None

clear

The esxcli upadm clear command is used to display clearing-related commands of UltraPath for vSphere.

None

show

The esxcli upadm show command is used to display query-related commands of UltraPath for vSphere.

None

start

The esxcli upadm start command is used to display start-related commands of UltraPath for vSphere.

None

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1000105152

Views: 36978

Downloads: 782

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next