No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor UltraPath for vSphere V100R008C50 User Guide 06

This document covers the functions, features, installation, configuration, upgrade, uninstallation, maintenance, troubleshooting, and FAQs of OceanStor UltraPath for vSphere (UltraPath forvSphere). UltraPath for vSphere is the multipathing software developed by HuaweiTechnologies Co., Ltd (Huawei for short). The document aims at helping users to be fully familiar with UltraPath for vSphere and its use.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting syslog on the vCLI

Setting syslog on the vCLI

This section describes how to set syslog.log and vmkernel.log on the vCLI.

Procedure

  1. Start the ESXi Shell client.
  2. Run esxcli system syslog config logger list to list the current log configuration information.
    # esxcli system syslog config logger list
    The syslog configuration information is as follows:
    Description: Default syslog catch-all
    Destination: syslog.log
    ID: syslog
    Rotation Size: 1024
    Rotations: 8
    
    The Vmkernel configuration information is as follows:
    Description: vmkernel logs
    Destination: vmkernel.log
    ID: vmkernel
    Rotation Size: 1024
        Rotations: 8
    
  3. Run esxcli system syslog config logger set --id=syslog --rotate=8 --size=30720 to set the syslog.log configuration information.
  4. Run esxcli system syslog config logger set --id=vmkernel --rotate=8 --size=30720 to set the vmkernel.log configuration information.
  5. After completing the settings, run esxcli system syslog reload for the settings to take effect.
  6. Run esxcli system syslog config logger list to list the current log configuration information.
    # esxcli system syslog config logger list
    The syslog configuration information is as follows:
    Description: Default syslog catch-all
    Destination: syslog.log
    ID: syslog
    Rotation Size: 30720
    Rotations: 8
    
    The Vmkernel configuration information is as follows:
    Description: vmkernel logs
       Destination: vmkernel.log
       ID: vmkernel
       Rotation Size: 30720
       Rotations: 8
    
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1000105152

Views: 39105

Downloads: 783

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next