No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_metro_consistency_group general

show hyper_metro_consistency_group general


The show hyper_metro_consistency_group general command is used to query a HyperMetro consistency group.


show hyper_metro_consistency_group general [ consistency_group_id=? ]





consistency_group_id=? ID of the HyperMetro consistency group.

Run the "show hyper_metro_consistency_group general" command without parameters to obtain the value.



Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


  • To query the HyperMetro consistency group 1, run the following command.

    admin:/>show hyper_metro_consistency_group general consistency_id=1
    ID : 1
    Name: cg001
    Health Status : Normal
    Running Status : Normal
    Sync Rate : Middle
    Role : Preferred
    Recovery Policy : automatic
    Domain Id : 1
    Domain name : HCD001
    Description : cg
    Sync Direction : Local to Remote
  • To query all HyperMetro consistency groups in the device, run the following command.

    admin:/>show hyper_metro_consistency_group general
    ID Name Health Status Running Status Sync Rate    Role    Sync Direction
    -- ---- ------------- -------------- ---------  --------  --------------
    1 cg001     Normal       Normal         Middle  Preferred  Local to Remote
    1 cg001     Normal       Normal         Middle  Preferred  Local to Remote

System Response

The following table describes the parameter meanings.




ID of the consistency group.


Name of the consistency group.

Health Status

Health status the consistency group: Normal or Fault.

Running Status

Running status of the consistency group.

Sync Rate

Synchronization rate: High, Middle, Low or Highest.


Whether the end is Preferred end or Non-preferred end.

Domain Id

Domain ID.

Recovery Policy

Recovery policy.

Domain Name

Domain name.


Description of the HyperMetro consistency group.

Sync Direction

Synchronization direction: Local to Remote or Remote to Local.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 317229

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next