No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show domain ldap

show domain ldap

Function

The show domain ldap command is used to query LDAP domain authentication configurations.

Format

show domain ldap

Parameters

None

Level

Guest

Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.

Example

To query LDAP domain authentication configurations, run the following command.

admin:/>show domain ldap
IP Address List : 10.40.25.8 
Base DN         : dc=huawei,dc=com 
Port            : 389 
Password Hash   : Md5 
Transfer Type   : LDAP
User Suffix     : dc=huawei,dc=com 
Group Suffix    : dc=huawei,dc=com 
Shadow Suffix   : dc=huawei,dc=com
Timelimit       : 3
Bind Timelimit  : 3
Idle Timelimit  : 30
Bind DN         : cn=root,dc=huawei,dc=com 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

IP Address List

IP address of the LDAP server. A maximum of three IP addresses can be specified, and they must be separated from each other using commas (,).

Base DN

Base distinguished name (DN) of the LDAP directory, that is, the root directory of the LDAP server.

Port

LDAP listening port.

Password Hash

Password encryption method. Possible values are "clear", "md5", and "crypt".

Transfer Type

LDAP encryption algorithm. Possible values are "LDAP" and "LDAPS", where:

  • "LDAPS": The SSL encryption algorithm is enabled.
  • "LDAP": The SSL encryption algorithm is disabled.

Bind DN

A DN bound with an LDAP server. If anonymous binding is not available for an LDAP server, you must bind DNs before you can retrieve the information on users or user groups.

User Suffix

Filter criteria for querying users. If this parameter is not configured, the querying starts from the root directory.

Group Suffix

Filter criteria for querying groups. If this parameter is not configured, the querying starts from the root directory.

Shadow Suffix

Filter criteria for querying passwords. If this parameter is not configured, the querying starts from the root directory.

Timelimit

The parameter specifies the amount of time to wait for a response to an LDAP query.

Bind Timelimit

The parameter specifies the amount of time to wait while trying to connect to an LDAP server.

Idle Timelimit

Client will close connections if the LDAP server has not been contacted for the number of seconds specified by the parameter.

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 236953

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next