No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system client_name

show system client_name


The show system client_name command is used to query the address information about a storage system maintenance terminal.


show system client_name





Usage Guidelines

By default, the storage system does not have the maintenance terminal address. By running the "change system client_name" command, you can configure or change the maintenance terminal address for the storage system.


Query the address information about a storage system maintenance terminal. If the information has been configured, you can see the address information about the maintenance terminal in "Client Name" of the output. Otherwise, "Client Name" is blank and the actual output prevails.

admin:/>show system client_name
  Client Name : CDHW

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 319433

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next