No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete initiator fc

delete initiator fc


The delete initiator fc command is used to delete Fibre Channel initiators. You can disable hosts from accessing the storage resources of the storage system by running this command.


delete initiator fc wwn=?





wwn=? World Wide Name (WWN) of a Fibre Channel initiator.

To obtain the value, run "show initiator".



Usage Guidelines

  • Running this command will interrupt the services associated with a host.
  • Before running this command, ensure that the selected initiator is exactly the one you want to delete and no service is running on the host for the initiator. Otherwise, the command execution will fail.
  • An initiator that you want to delete must have been created and disconnected.


To delete the Fibre Channel initiator whose WWN is "656de54589654569", run the following command.

admin:/>delete initiator fc wwn=656de54589654569
CAUTION: You are about to delete the initiator. This operation will cause the initiator unavailable.
Suggestion: Before performing this operation, ensure that the initiator needs to be deleted.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 318648

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next