No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show enclosure

show enclosure

Function

The show enclosure command is used to query details on the engine and disk enclosure.

Format

show enclosure [ enclosure_id=? ]

Parameters

Parameter

Description

Value

enclosure_id=? ID of an engine or disk enclosure.

To obtain the value, run "show enclosure" without parameter.

Level

Guest

Usage Guidelines

  • To query details on all engines and disk enclosures, run show enclosure.
  • To query details on a specific engine or disk enclosure, run show enclosure enclosure_number=?.

Example

  • To query details on all engines and disk enclosures, run the following command. The command output varies depending on a specific product.

    admin:/>show enclosure
    ID Logic Type Health Running Type Temperature
    Status Status (Celsius)
    ------ ------------------ ------ ------ ------------------------ -----------
    ENG0 Engine Normal Online BMC Controller Enclosure 50
    DAE000 Expansion Enclosure Normal Online 4U SAS 24 Slot 28
  • To query details on the engine whose ID is "ENG0", run the following command. The command output varies depending on a specific product.

    admin:/>show enclosure enclosure_id=ENG0
     
    ID : ENG0
    Logic Type : Engine
    Health Status : Normal
    Running Status : Online
    Location : SMB0.20U
    Type : BMC Controller Enclosure
    Temperature(Celsius) : 50
    SN : --
    MAC : --
    Height(U) : 4
    Expansion Depth : 0

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 317490

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next