No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show quota_tree general

show quota_tree general


The show quota_tree general command is used to query the quota tree in a file system.


show quota_tree general { file_system_id=? | quota_tree_id=? }





file_system_id=? File system ID, used to batch query quota trees.

To obtain the value, run the "show file_system general" command.

quota_tree_id=? Quota tree ID, used to query a specified quota tree. The parameter value is in the format of filesystem. filesystemID ranges from 0 to 65535, and quotatreeID ranges from 0 to 4096.

To obtain the value, run the "show quota_tree general" command.



Usage Guidelines

  • The following parameters are mutually exclusive: "file_system_id" and "quota_tree_id".
  • The show quota_tree general file_system_id=? command is used to query all quota trees in a file system.
  • The show quota_tree general quota_tree_id=? command is used to query a specified quota tree in a file system.
  • OceanStor 2200 V3 storage system do not support this command.


  • Running the command to query all the quota trees in the file system whose ID is 0.

    admin:/>show quota_tree general file_system_id=0
    Quota Tree ID Quota Tree Name File System ID Quota Switch
    ------------- --------------- -------------- ------------
  • Running the command to query the quota tree whose ID is 0@1

    admin:/>show quota_tree general 
    Quota Tree ID :0@1
    Quota Tree Name :qtree0000
    File System ID :0
    Quota Switch :Off

System Response

The following table describes the parameter meanings.



Quota Tree ID

Quota tree ID.

Quota Tree Name

Quota tree name.

File System ID

File system ID.

Quota Switch

Quota switch status.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 315474

Downloads: 206

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next