No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show bond_port_count

show bond_port_count

Function

The show bond_port_count command is used to check the number of bonded ports.

Format

show bond_port_count [ failover_group_id=? ]

Parameters

Parameter

Description

Value

failover_group_id=? Id of failover group.This parameter does not support 2200 V3 storage systems.

The value is an integer between 0 and 8191.

Level

Guest

Usage Guidelines

You can use the show bond_port_count command to check the number of bonded ports.

Example

To check the number of bonded ports, run the following command:

admin:/>show bond_port_count
Bond Port Number : 2
 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Bond Port Number

Indicates the number of bonded ports.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 318405

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next