No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change reduction general

change reduction general

Function

The change reduction general command is used to enable or disable data reduction of a LUN.

Format

change reduction general lun_id_list=? reduction_switch=?

Parameters

Parameter

Description

Value

lun_id_list=? Indicates the list of target LUN IDs.

The value is an integer ranging from 0 to 65535. LUN IDs separated by commas(,), or LUN ID range separated by hyphens(-), such as: 0,5-8.

reduction_switch=? Indicates the status of data reduction.

The value can be:

  • on
  • off

Level

Administrator

Usage Guidelines

None

Example

To disable data reduction of a LUN, run the following command:

admin:/>change reduction general lun_id_list=1 reduction_switch=off

Change LUN 1 reduction switch successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 241429

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next