No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show port_group port

show port_group port


show port_group port command is used to query information about ports in a port group.


show port_group port port_group_id=? [ port_type=? ]





port_group_id=? ID of a port group that you want to query.

To obtain the value, run "show port_group general".

port_type=? Type of a port that you want to query.

The value can be "FC", "ETH", "FCoE", or "IB", where:

  • "FC": indicates Fibre Channel ports.
  • "ETH": indicates ETH ports.
  • "FCoE": indicates FCoE ports.
  • "IB": indicates IB ports.



Usage Guidelines



Query information about ports in port group "0". The ID and output vary depending on a specific product.

admin:/>show port_group port port_group_id=0
ETH port:
FC port:
ID Health Status Running Status Type Working Rate(Mbps)
---------- ------------- -------------- --------- ------------------
ENG0.A2.P1 Normal Link Down Host Port --
ENG0.A2.P2 Normal Link Down Host Port --
WWN Role Working Mode Configured Mode
---------------- ----------- ------------ ---------------
0000000002010101 INI and TGT -- Auto-Adapt
0000000002010202 INI and TGT -- Auto-Adapt
FCoE port:

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 316493

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next