No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ssd routeswitch

change ssd routeswitch

Function

change ssd routeswitch command is used to set the status of a routine SSD test.

Format

change ssd routeswitch ssd_route_switch=?

Parameters

Parameter

Description

Value

ssd_route_switch=? Status of a routine SSD test.

The value can be:

  • "on": The routine SSD test is enabled.
  • "off": The routine SSD test is disabled.

Level

Administrator

Usage Guidelines

None

Example

Set the status of a routine SSD test to "off".

admin:/>change ssd routeswitch ssd_route_switch=off
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 259177

Downloads: 176

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next