No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete file

delete file


The delete file command is used to delete files of a specific type from the system memory, where the files to be deleted have been exported before.


delete file filetype=? [ controller_id=? ]





filetype=? Type of the file.

The value can "event", "log", "running_data", "configuration_data", "all_log", or "smart" where:

  • "event": indicates event files.
  • "log": indicates log files.
  • "running_data": indicates system running data files.
  • "configuration_data": indicates system configuration files.
  • "all_log": indicates all logs of the system.
  • "smart": indicates disk smart info.
controller_id=? Controller ID.

Controller ID separated by comma, the value is in the format of "XA","XB","XC","XD", where the "X" is an integer ranging from 0 to 3, for example: "0A","1B". This parameter can be specified only when "file_type" is set to "log", "all_log", or "smart".



Usage Guidelines



To delete event files from the system memory, where the files to be deleted have been exported before, run the following command:

admin:/>delete file filetype=event
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 369636

Downloads: 245

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next