No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove cache_partition file_system

remove cache_partition file_system


The remove cache_partition file_system command is used to remove filesystem(s) from a cache partition.


remove cache_partition file_system cache_partition_id=? file_system_id_list=?





cache_partition_id=? ID of the cache partition from which you want to remove filesystem(s).

To obtain the value, run "show cache_partition general".

file_system_id_list=? IDs of the filesystem(s) that you want to remove from a cache partition.
  • To obtain the value, run "show file_system general".
  • If you need to remove multiple filesystem(s), separate the filesystem IDs with commas (,), or ID range separated by hyphens(-), such as: 0,5-8.


Super administrator

Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


To remove filesystem 0 from cache partition 0, run the following command.

admin:/>remove cache_partition file_system cache_partition_id=0 file_system_id_list=0
DANGER: You are about to remove file system from SmartPartition.
This operation may affect file system performance. During the operation, this file system cannot process new I/O requests. The file system can process new I/O requests when its health status is "Normal" and its running status is "Online".
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct SmartPartition and file system are selected.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Remove file system 0 from cache partition successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 365367

Downloads: 240

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next