No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_replication available_file_system

show remote_replication available_file_system

Function

The show remote_replication available_file_system command is used to query the information on available file system remote replication tasks.

Format

show remote_replication available_file_system array_type=? remote_device_id=?

Parameters

Parameter

Description

Value

array_type=? Type of a remote device.

The value can be:

"replication": The remote device is from Huawei.

remote_device_id=? ID of a remote device.

To obtain the value, run "show remote_device general".

Level

Guest

Usage Guidelines

This command does not support 2200 V3 storage system.

Example

To query the available file system remote replication whose manufacturer type is current manufacturer and the remote device id is 0.

admin:/>show remote_replication available_file_system array_type=replication remote_device_id=0
File System ID Name Health Status Device ID Device SN Capacity Vendor Model
-------------- ---- ------------- --------- -------------------- ---------- ------ ----- 
2 fs2 Normal 0 210235980510E7000006 50.000GB -- --

System Response

The following table describes the parameter meanings.

Parameter

Meaning

File System ID

ID of file system.

Name

Name of file system.

Health Status

Health state.

Device ID

ID of remote device.

Device SN

Serial number of remote device.

Capacity

Capacity of file system.

Vendor

Vendor of remote device.

Model

Model of remote device.

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 236652

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next