No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change cache_partition general

change cache_partition general


The change cache_partition general command is used to modify the properties of a cache partition, including the partition name, desired cache read capacity, and desired cache write capacity.


change cache_partition general cache_partition_id=? { name=? | expect_read_size=? | expect_write_size=? }





cache_partition_id=? ID of a cache partition whose properties you want to modify.

To obtain the value, run "show cache_partition general".

name=? New name of a cache partition.

The value contains 1 to 31 characters including digits, letters, hyphens (-), underscores (_), and periods (.).

expect_read_size=? Updated cache read capacity.

The value is an integer multiple of 128, ranging from 256 to 67,108,864, expressed in MB.

expect_write_size=? Updated cache write capacity.

The value is an integer multiple of 128, ranging from 256 to 67,108,864, expressed in MB.



Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


Set the name, desired cache read capacity, and desired cache write capacity of cache partition "0" to "regina", "512MB", and "512MB" respectively.

admin:/>change cache_partition general cache_partition_id=0 name=regina expect_read_size=512 expect_write_size=512
CAUTION: You are about to change the read partition size or write paritition size of SmartPartition. 
This operation may affect the performance of LUN or file system. 
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct SmartPartition is selected.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 316567

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next