No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system server_port

change system server_port

Function

The change system server_port command is used to modify port information of the system.

Format

change system server_port server_name=? port_num=?

Parameters

Parameter

Description

Value

server_name=? Service name to be changed.

The value can be "SSH".

port_num=? Port number to be changed.

The value can be "22" or an integer from 24000 to 24900.

Level

Super administrator

Usage Guidelines

  • The first parameter of this command indicates the name of this service,this command just can be used to modify the port number of SSH service.
  • The second parameter of this command indicates the port number of the service to be changed. The value can be "22" or an integer from 24000 to 24900.
  • If dump servers (for example, for performance statistics file dumping and alarm dumping) are configured and use the SFTP protocol, ensure that port IDs used by the dump servers are consistent with those used by SSH services of the storage array.

Example

To change the storage system's port of SSH to "24000",run the following command.

admin:/>change system server_port server_name=SSH port_num=24000
WARNING:You are about to change the SSH service port number. This operation changes the port used to manage the storage system.
Suggestion: Ensure that the SSH port number needs to be changed. 
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operaton?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 317324

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next