No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove resource_group ad_user

remove resource_group ad_user


The remove resource_group ad_user command is used to remove an AD domain user from a local user group.


remove resource_group ad_user group_id=? { name=? | id=? }





name=? Indicates the name of the AD domain user.

The value ranges from 1 byte to 255 bytes.

group_id=? Indicates the ID of the local user group.

The value ranges from 0 to 900,000.

id=? Indicates the SID of the AD domain user.

The value ranges from 1 byte to 256 bytes.



Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.


To remove an AD domain user from a local user group, run the following command.

admin:/>remove resource_group ad_user group_id=100000 name=huawei\\user01
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 364401

Downloads: 238

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next