No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change vlan general

change vlan general


The change vlan general command is used to change the VLAN maximum transmission unit.


change vlan general name=? mtu=?





name=? VLAN name.

To obtain the value, run the "show vlan general" command.

mtu=? VLAN maximum transmission unit.

The value is an integer between 1280 and 9000.



Usage Guidelines

  • OceanStor 2200 V3 storage system do not support this command.


  • To change the maximum transmission unit to 1500, run the following command:

    admin:/>change vlan general name=CTE0.A3.P3.1 mtu=1500
    DANGER: You are going to modify the MTU settings for VLAN. This operation may interrupt services or cause service exceptions.
    Suggestion: Before you perform this operation, determine whether the modification is necessary.
    Have you read danger alert message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)
    Command executed successfully.
  • To check the change, run the following command:

    admin:/>show vlan general name=CTE0.A3.P3.1
    Name : CTE0.A3.P3.1 
    Running Status : Link Down 
    VLAN ID : 1 
    MTU : 1500 
    Port Type : ETH 
    Port ID : CTE0.A3.P3

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 363876

Downloads: 237

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next