No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication synchronize

change remote_replication synchronize

Function

The change remote_replication synchronize command is used to synchronize a specific remote replication. Use this command when you need to synchronize the data at the primary resource to a secondary resource to ensure data consistency.

Format

change remote_replication synchronize remote_replication_id=?

Parameters

Parameter

Description

Value

remote_replication_id=? ID of a remote replication task.

To obtain the value, run "show remote_replication unified".

Level

Administrator

Usage Guidelines

  • Running this command will cause data of the primary resource to overwrite data of a secondary resource.
  • Before running this command, ensure that the selected secondary resource is exactly the one you want to synchronize with the primary resource, and that the data of the secondary resource is safe to be overwritten.
  • You cannot synchronize the primary and secondary resources for a remote replication task that has been added to a consistency group.
  • When a remote replication task is in synchronizing state, you cannot synchronize between the local and remote resources.

Example

To synchronize the primary and secondary resources for remote replication task "9747215445131264", run the following command:

admin:/>change remote_replication synchronize remote_replication_id=9747215445131264
DANGER: You are about to synchronize the data on the primary resource to the secondary resource in remote replication. The secondary resource belongs to storage array. This operation overwrites the data on the secondary resource with the data on the primary resource.
Suggestion: Before you perform this operation, ensure that the correct secondary resource is selected and the data on the secondary resource can be overwritten.
Have you read warning message carefully?(y/n)y
 
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 265805

Downloads: 180

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next