No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show logical_port general

show logical_port general

Function

The show logical_port general command is used to query logical ports information in the system.

Format

show logical_port general [ logical_port_name=? ]

Parameters

Parameter

Description

Value

logical_port_name=? Logical port Name.

Run the "show logic_port general" command without any parameters to obtain the value.

Level

Guest

Usage Guidelines

  • To query all logical port information, run "show logical_port general".
  • To query specific logical port information, run "show logical_port general logical_port_name=?".
  • OceanStor 2200 V3 storage system do not support this command.

Example

  • To query all logical ports, run the following command.

    admin:/>show logical_port general
    Logical Port Name  Running Status  IPv4 Address     IPv6 Address  Home Port Type  Home Port ID  Current Port Type  Current Port ID  Work Controller ID  
      -----------------  --------------  ---------------  ------------  --------------  ------------  -----------------  ---------------  ------------------  
      logical_port_01    Link Up         100.100.100.100  --            ETH             CTE0.A.H1     ETH                CTE0.A.H1        0A                  
      logical_port_02    Link Up         100.100.100.101  --            ETH             CTE0.A.H1     ETH                CTE0.A.H1        0A                  
      logical_port_03    Link Up         100.100.100.102  --            ETH             CTE0.A.H1     ETH                CTE0.A.H1        0A                  
      logical_port_04    Link Up         100.100.100.103  --            ETH             CTE0.A.H1     ETH                CTE0.A.H1        0A                  
      logical_port_05    Link Up         100.100.100.104  --            ETH             CTE0.A.H1     ETH                CTE0.A.H1        0A                  
  • To query a specific logical port, run the following command.

    admin:/>show logical_port general logical_port_name=lp001
    Logical Port Name : lp001 
    Running Status : Link Down 
    IPv4 Address : 10.178.1.133 
    IPv4 Mark : 255.255.0.0 
    IPv4 Gateway : 
    IPv6 Address : 
    IPv6 Mark : 
    IPv6 Gateway : 
    Role : -- 
    Support Protocol : NFS+CIFS 
    Home Port Type : ETH 
    Home Port ID : ENG0.A2.P2 
    Owner Controller ID : 0A 
    Current Port Type : ETH 
    Current Port ID : ENG0.A2.P2 
    Work Controller ID : 0A 
    Activation Status : Yes 
    Address Family : IPv4 
    Is Private : No 
    Failover Group ID : 0 
    Failover Enabled : Yes 
    Failback Mode : Manually 
    Failover Group Name : System-define

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Logical Port Name

Logical Port Name.

Running Status

Running Status.

IPv4 Address

Logical Port IPv4 Address.

IPv4 Mask

Logical Port IPv4 Subnet Mask.

IPv4 Gateway

Logical Port IPv4 Gateway.

IPv6 Address

Logical Port IPv6 Address.

IPv6 Mask

Logical Port IPv6 Mask.

IPv6 Gateway

Logical Port IPv6 Gateway.

Role

Logical Port Role.

Support Protocol

Logical Port Support Protocol.

Home Port Type

Logical Port Home Port Type.

Home Port ID

Logical Port Home Port ID.

Owner Controller ID

Logical Port Owner Controller ID.

Current Port Type

Current Port Type.

Current Port ID

Current Port ID.

Work Controller ID

Work Controller ID.

Activation Status

Activation Status.

Address Family

IP Address Family.

Is Private

Is Configurable Or Not.

Failover Group ID

Failover Group ID.

Failover Enabled

Failover Enabled.

Failback Mode

Failback Mode.

Failover Group Name

Failover Group Name.

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 236053

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next