No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_device general

change remote_device general


The change remote_device general command is used to rename remote devices. The remote devives must be heterogeneous storage devices.


change remote_device general remote_device_id=? [ name=? ] [ compress_algorithm=? ] [ compress_judge=? ]





remote_device_id=? ID of a remote device.

To obtain the value, run "show remote_device general".

name=? An updated name of a remote device.

The value contains 1 to 31 characters including letters, digits, hyphens (-), underscores (_), and periods (.).

compress_algorithm=? Compress level to be set.

The value could be:1:fast:The best compress performance.2:deep:The best compress efficency.The default value is fast.

compress_judge=? Whether to enable smart compress.

The value could be:1:Yes:enable.2:No:disable.The default value is Yes.



Usage Guidelines



  • To rename remote device "1" to "newname001", run the following command:

    admin:/>change remote_device general remote_device_id=1 name=newname001
    Command executed successfully.
  • To change remote device "1" compress level to "deep" and compress judge to "yes", run the following command.

    admin:/>change remote_device general remote_device_id=1 compress_algorithm=deep compress_judge=yes
    Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 365915

Downloads: 240

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next