No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change antivirus_server general

change antivirus_server general


The change antivirus_server general command is used to modify the logical port lists of an Anti-Virus server.


change antivirus_server general id=? logical_port_name_list=?





id=? ID of the Anti-Virus server whose logical port list is to be modified.

To obtain the value, run the "show antivirus_server general" command.

logical_port_name_list=? Logical port lists that can be used by the Anti-Virus server.

To obtain the value, run the "show logical_port general" command. Logical ports are separated by commas (,). For example, "lif01,lif02".



Usage Guidelines

  • Before running this command, ensure that the system is running correctly.
  • Before running this command, ensure that the Anti-Virus module is running correctly.
  • This command does not support OceanStor 2200 V3 storage system.


To change the logical port list of Anti-Virus server 1 to "lif01,lif02", run the following command:

admin:/>change antivirus_server general id=1 logical_port_name_list=lif01,lif02
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 314852

Downloads: 204

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next