No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show performance lun_copy

show performance lun_copy


The show performance lun_copy command is used to query the performance statistics on a LUN copy task. Run this command to analyze the performance statistics on a LUN copy task in real time.


show performance lun_copy [ lun_copy_id=? ] [ lun_copy_id_list=? ]





lun_copy_id=? ID of a LUN copy task on which you want to query performance statistics.

To obtain the value, run "show lun_copy general".

lun_copy_id_list=? List of LUN copy task IDs on which you want to query performance statistics.
  • To obtain the value, run "show lun_copy general".
  • Separate the LUN copy task IDs with commas (,) or hyphens (-).



Usage Guidelines

  • You will be prompted with optional performance statistics categories upon running this command. In this condition, typing a number or multiple numbers (separated by commas) for the selected categories and pressing "Enter" displays the performance statistics for those categories.
  • Performance statistics will be updated in real time.
  • Typing "q" on the command line interface (CLI) exits the active performance statistics display.


Query the performance data of the LUN copy which ID is "0".

admin:/>show performance lun_copy lun_copy_id=0
0.Bandwidth(MB/s) / Block Bandwidth(MB/s) 
1.Unsynchronized Data Amount(MB)
Input item(s) number seperated by comma:0
  Bandwidth(MB/s) / Block Bandwidth(MB/s) : 0

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 319459

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next