No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show failover_group member

show failover_group member

Function

The show failover_group member command is used to query the members in a failover group on the storage system.

Format

show failover_group member [ failover_group_id=? ] [ type=? ]

Parameters

Parameter

Description

Value

failover_group_id=? Indicates the ID of the failover group.

The value is an integer between 0 and 8191.

type=? Indicates the type of the object in the failover group.

The value can be "eth_port", "bond_port", and "vlan", where

  • "eth_port": Ethernet port
  • "bond_port": bond port
  • "vlan": VLAN

Level

Guest

Usage Guidelines

  • You can use the "show failover_group member failover_group_id=?" command to query the Ethernet ports, bond port, and VLAN port in a specified failover group.
  • You can use the "show failover_group member failover_group_id=0 type=?" command to query a specified object in a failover group.
  • OceanStor 2200 V3 storage system do not support this command.

Example

  • To query the Ethernet network ports, bond ports, and VLAN ports in failover group 0, run the following command:

    admin:/>show failover_group member failover_group_id=0 
    ETH Port:
    ID Health Status Running Status Type IPv4 Address IPv6 Address MAC Role Working Rate(Mbps) 
    ---------- ------------- -------------- --------- ------------ ------------ ----------------- ---- ------------------ 
    ENG0.A3.P0 Normal Link Up Host Port -- 80:fb:06:df:d1:71 -- 1000 
    ENG0.A3.P1 Normal Link Down Host Port -- 80:fb:06:df:d1:70 -- -- 
    ENG0.A3.P2 Normal Link Down Host Port -- 80:fb:06:df:d1:6f -- -- 
    ENG0.A3.P3 Normal Link Down Host Port -- 80:fb:06:df:d1:6e -- -- 
    ENG0.B2.P0 Normal Link Down Host Port -- 78:1d:ba:cb:1d:cc -- -- 
    ENG0.B2.P1 Normal Link Down Host Port -- 78:1d:ba:cb:1d:cd -- -- 
    ENG0.B3.P0 Normal Link Down Host Port -- 20:0b:c7:3e:82:1b -- -- 
    Bond Port:
    ID Name Port ID List 
    ------------ ---- -------------------------------- 
    549772730113 hhh ENG0.B3.P1,ENG0.B3.P2,ENG0.B3.P3 
    VLAN:
  • To query the Ethernet network ports in failover group 0, run the following command:

    admin:/>show failover_group member failover_group_id=0 type=eth_port
    ETH Port:
    ID Health Status Running Status Type IPv4 Address IPv6 Address MAC Role Working Rate(Mbps) 
    ---------- ------------- -------------- --------- ------------ ------------ ----------------- ---- ------------------ 
    ENG0.A3.P0 Normal Link Up Host Port -- 80:fb:06:df:d1:71 -- 1000 
    ENG0.A3.P1 Normal Link Down Host Port -- 80:fb:06:df:d1:70 -- -- 
    ENG0.A3.P2 Normal Link Down Host Port -- 80:fb:06:df:d1:6f -- -- 
    ENG0.A3.P3 Normal Link Down Host Port -- 80:fb:06:df:d1:6e -- -- 
    ENG0.B2.P0 Normal Link Down Host Port -- 78:1d:ba:cb:1d:cc -- -- 
    ENG0.B2.P1 Normal Link Down Host Port -- 78:1d:ba:cb:1d:cd -- -- 
    ENG0.B3.P0 Normal Link Down Host Port
  • To query the bond port in failover group 0, run the following command:

    admin:/>show failover_group member failover_group_id=0 type=bond_port
    Bond Port:
    ID Name Port ID List 
    ------------ ---- -------------------------------- 
    549772730113 hhh ENG0.B3.P1,ENG0.B3.P2,ENG0.B3.P3
  • To query VLAN port in failover group 4184, run the following command:

    admin:/>show failover_group member failover_group_id=4184 type=vlan
    VLAN:
    ID Name Running Status Tag MTU Port Type Port ID 
    ---------- ------------- -------------- --- ---- --------- ---------- 
    4261543941 ENG0.A3.P0.88 Link Up 88 1500 ETH ENG0.A3.P0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ETH Port

Indicates the Ethernet port in a failover group.

Bond Port

Indicates the bond port in a failover group.

VLAN

Indicates the VLAN port in a failover group.

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 262405

Downloads: 178

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next