No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_replication general

show remote_replication general


The show remote_replication general command is used to query information about remote replication pairs.


show remote_replication general [ remote_replication_id=? ]





remote_replication_id=? ID of a remote replication pair.

To obtain the value, run "show remote_replication general" without parameters.



Usage Guidelines

  • To query the basic information about all the remote replication pairs, run "show remote_replication general".
  • To query the details about a specific remote replication pair, run "show remote_replication general remote_replication_id=?".


  • Query basic information about all the remote replication pairs.

    admin:/>show remote_replication general
    ID Health Status Running Status Is Primary Replication Mode Compress Enable Compress Valid
    ---------------- ------------- -------------- ---------- ---------------- --------------- ---------------
    200bc79b99520000 Normal Splited No Asynchronous Yes Yes
  • Query details about remote replication pair "200bc79b99520000".

    admin:/>show remote_replication general remote_replication_id=200bc79b99520000
    ID : 200bc79b99520000
    Health Status : Normal
    Running Status : Splited
    Is Primary : No
    Local LUN ID : 5
    Local LUN Name : LUN005
    Remote Device ID : 0
    Remote Device SN : 210235G7KA10D9000001
    Remote Device Name : _
    Remote LUN ID : 0
    Remote LUN Name : LUN000_001
    Primary LUN Capacity : 5.000GB
    Synchronization Type : Manual
    Recovery Policy : Automatic
    Replication Mode : Asynchronous
    Progress(%) : --
    Start Time : 2013-12-22/17:18:32 -09:00
    End Time : 2013-12-22/17:18:32 -09:00
    Rate : Middle
    Timing Length : --
    Primary LUN Data Status : Consistent
    Second LUN Data Status : Consistent
    Second LUN Access : Read Only
    Is Restore : No
    Is In Consistency Group : No
    Consistency Group ID : --
    Consistency Group Name : --
    Is Data Sync : No
    Compress Enable : Yes                          
    Compress Valid : Yes
    Remote I/O Timeout Period(s) : -- 

System Response

The following table describes the parameter meanings.




Remote replication ID.

Health Status

Health status.

Running Status

Running status.

Is Primary

Whether it is the primary end of the remote replication.

Local LUN ID

Primary LUN ID.

Local LUN Name

Primary LUN name.

Remote Device ID

Remote device ID.

Remote Device SN

Serial number of remote device.

Remote Device Name

Remote device name.

Remote LUN ID

Remote LUN ID.

Remote LUN Name

Remote LUN name.

Primary LUN Capacity

Primary LUN capacity.

Synchronization Type

Synchronization type.

Recovery Policy

Recovery policy.

Replication Mode

Remote replication mode.


Progress of remote replication.

Start Time

Start time of synchronizing.

End Time

End time of synchronizing.


Synchronization rate of remote replication.

Timing Length

Timing period (data synchronization period).

Primary LUN Data Status

Primary LUN data status.

Second LUN Data Status

Secondary LUN data status.

Second LUN Access

Secondary LUN access permission.

Is Restore

Whether the secondary LUN of the remote replication pair is being rolled back.

Is In Consistency Group

Whether the remote replication pair belongs to a consistency group.

Consistency Group ID

Consistency group ID of the remote replication pair.

Consistency Group Name

Consistency group name of the remote replication pair.

Is Data Sync

Whether the data on the primary and secondary LUNs is consistent.

Compress Enable

Whether to enable compression.

Compress Valid

Whether compression is valid.

Remote I/O Timeout Period

Remote I/O timeout threshold.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 318399

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next