No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete initiator iscsi

delete initiator iscsi


The delete initiator iscsi command is used to delete Internet Small Computer Systems Interface (iSCSI) initiators. You can disable hosts from accessing the storage resources of the storage system by running this command.


delete initiator iscsi iscsi_iqn_name=?





iscsi_iqn_name=? The iSCSI qualified name (IQN) of an iSCSI initiator.

To obtain the value, run "show initiator".



Usage Guidelines

  • Before you perform this operation, ensure that you select the correct initiator and services running on the host to which the initiator is added are stopped. Otherwise, running delete initiator iscsi fails.
  • Disconnect the initiator from the host before you delete the initiator.


To delete the iSCSI initiator whose IQN is "iqn.01", run the following command.

admin:/>delete initiator iscsi iscsi_iqn_name=iqn.01
CAUTION: You are about to delete the initiator. This operation will cause the initiator unavailable.
Suggestion: Before performing this operation, ensure that the initiator needs to be deleted.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 363051

Downloads: 235

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next