No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add smartqos_policy lun_group

add smartqos_policy lun_group


The add smartqos_policy lun_group command is used to add LUNs in a specified LUN group to a SmartQoS policy.


add smartqos_policy lun_group smartqos_policy_id=? lun_group_id_list=?





smartqos_policy_id=? ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy general".

lun_group_id_list=? ID list of LUN groups.

To obtain the value, run "show lun_group general". You can specify multiple lun_group IDs separated by commas (,), or ID range separated by hyphens(-), such as: 0,5-8.

A maximum of 64 objects are allowed.



Usage Guidelines

After you add LUN groups to a SmartQoS policy, the policy will be effective for the LUNs in the added LUN groups.


Add LUNs in LUN groups "1" and "2" to SmartQoS policy "0".

admin:/>add smartqos_policy lun_group smartqos_policy_id=0 lun_group_id_list=1,2
CAUTION: You are about to add LUN groups into traffic control policy.
This operation may affect LUN performance of the LUN group.
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct traffic control policy and LUN group are selected.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 315910

Downloads: 206

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next