No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change on_access_scan general

change on_access_scan general


The change on_access_scan general command is used to modify On-Access scanning settings.


change on_access_scan general id=? { scan_policy_id=? | scan_enabled=? }





id=? ID of the On-Access scanning task.

To obtain the value, run the "show on_access_scan general" command.

scan_policy_id=? Scanning policy ID of a On-Access scanning policy.

To obtain the value, run the "show antivirus_scan policy" command.

scan_enabled=? Whether to enable On-Access scanning.

Possible values are "yes" and "no", where: 1:"yes": to enable On-Access scanning. 2:"no": to disable On-Access scanning.



Usage Guidelines

  • Before running this command, ensure that the system is running correctly.
  • Before running this command, ensure that the Anti-Virus module is running correctly.
  • This command does not support OceanStor 2200 V3 storage system.


To change the scanning policy of scanning task "0" to scanning policy "2" and set the On-Access scanning switch to "no", run the following command:

admin:/>change on_access_scan general id=0 scan_policy_id=2 scan_enabled=no
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 363100

Downloads: 235

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next