No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show resource_group general

show resource_group general

Function

The show resource_group general command is used to query the information of resource group(s).

Format

show resource_group general [ name=? | group_id=? ]

Parameters

Parameter

Description

Value

name=? The name of resource group.

The value consists of 1 to 32 characters, and cannot contain spaces, control character or any of the following special characters: /\[]:;|=,+*?<>@. The last character cannot be a period (.).

group_id=? The ID of resource group.

The value ranges from 0 to 900,000.

Level

Guest

Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.

Example

  • To query the information of resource groups, run the following command.

    admin:/>show resource_group general
    Resource Group ID Resource Group Name Group Type 
    ----------------- ------------------- ---------- 
    99999 Administrators Default 
    100000 default_group Default 
    100001 group1 Create
  • To query the information of a resource group, run the following command.

    admin:/>show resource_group general group_id=100001
    Resource Group ID : 100001 
    Resource Group Name : group1 
    Description : 
    Group Type : Create
  • To query the information of a resource group, run the following command.

    admin:/>show resource_group general name=group1
    Resource Group ID : 100001 
    Resource Group Name : group1 
    Description : 
    Group Type : Create

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Resource Group ID

The ID of resource group.

Resource Group Name

The name of resource group.

Description

The description of resource group.

Group Type

The type of resource group.

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 237582

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next