No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system general

show system general


The show system general command is used to query the general system information.


show system general





Usage Guidelines



To query the general system information, run the following command. The command output varies depending on a specific product. In the following command output, the fields related to the product model are replaced by "X".

admin:/>show system general
  System Name         : XXX.Storage 
  Health Status       : Normal 
  Running Status      : Normal 
  Total Capacity      : 3.186TB 
  SN                  : 210235G6EHZ0CX0000XX 
  Location            : 
  Product Model       : XXXX 
  Product Version     : VX00R00XCXX 
  High Water Level(%) : 80 
  Low Water Level(%)  : 30 
  WWN                 : XXXX 
  Time                : 2015-07-07/15:34:05 UTC+08:00

System Response

The following table describes the parameter meanings.



System Name

Device name.

Health Status

Indicates the health status.

Running Status

Indicates the running status.

Total Capacity

Total capacity of all member disks.


Device serial number.


Device location.

Product Model

Product model.

Product Version

Product version.

High Water Level(%)

High water level. The upper threshold for the amount of the dirty data stored in the Cache. When the amount of the dirty data stored in the Cache reaches the high water level, the Cache starts to synchronize dirty data into disks.

Low Water Level(%)

Low water level. The low threshold for the amount of dirty data stored in the Cache. When the amount of the dirty data stored in the Cache falls to the low water level, the Cache stops synchronizing dirty data into disks.


Current time.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 363034

Downloads: 235

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next