No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_metro_pair general

delete hyper_metro_pair general

Function

The delete hyper_metro_pair general command is used to delete a HyperMetro pair.

Format

delete hyper_metro_pair general pair_id=? [ is_local_delete=? | is_refresh_wwn=? ] *

Parameters

Parameter

Description

Value

pair_id=? ID of the HyperMetro pair.

Run the "show hyper_metro_pair general" command to obtain the value.

is_local_delete=? Whether the pair will be deleted from local devices.Only if "is_local_delete" is set to "yes", parameter "is_refresh_wwn" is displayed.

The value is "yes" or "no", where:

  • "yes": The pair will be deleted from local devices.
  • "no": The pair will not be deleted from local devices.
The default value is "no".
is_refresh_wwn=? Whether to refresh the LUN WWN (valid for SAN HyperMetro pair local delete only).

The value is "yes" or "no", where:

  • "yes": to refresh the WWN.
  • "no": not to refresh the WWN.
The default value is "yes".

Level

Administrator

Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.

Example

  • To delete HyperMetro pair "1" from local devices, run the following command.

    admin:/>delete hyper_metro_pair general pair_id=1 is_local_delete=yes
    WARNING: You are about to delete a HyperMetro pair. The deletion cannot be undone. If you need the configuration later, you must create it again.
    To prevent LUN WWN conflicts, refresh LUN WWNs when you delete a HyperMetro pair from the local storage array that is not accessed by hosts.
    Suggestion: Before performing this operation, ensure that the parameters are configured correctly to prevent service exceptions.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.
  • To delete HyperMetro pair "1", run the following command.

    admin:/>delete hyper_metro_pair general pair_id=1
    WARNING: You are about to delete a HyperMetro pair. The deletion cannot be undone. If you need the configuration later, you must create it again.
    To prevent LUN WWN conflicts, refresh LUN WWNs when you delete a HyperMetro pair from the local storage array that is not accessed by hosts.
    Suggestion: Before performing this operation, ensure that the parameters are configured correctly to prevent service exceptions.
    Suggestion: Before performing this operation, ensure that the parameters are correct to prevent service exceptions.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 236722

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next