No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snapshot general

show snapshot general


The show snapshot general command is used to query snapshot information.


show snapshot general [ snapshot_id=? ] [ snapshot_name=? ] [ usage_type=? ]





snapshot_id=? Snapshot ID.

To obtain the value, run "show snapshot general" without parameters.

snapshot_name=? Snapshot Name.

To obtain the value, run "show snapshot general" without parameters.

usage_type=? Snapshot Type.

The value can be "LUN_SNAP" or "VVOL_SNAP".



Usage Guidelines

  • Run show snapshot general to query information about all snapshots.
  • Run show snapshot general snapshot_id=? to query information about a specified snapshot.


Query detailed information about snapshot "1".

admin:/>show snapshot general snapshot_id=1
  ID                   : 1
  Name                 : SnapshotName
  Source LUN ID        : 0
  Source LUN Name      : Lun2
  Health Status        : Normal
  Running Status       : Restore
  Capacity             : 1.000GB
  Subscribed Capacity  : 0.000GB
  WWN                  : 6000000100000000196872da00000001
  Time Stamp           : 2013-07-24/14:18:38 +08:00
  Restore Start Time   : 2013-07-24/16:25:04 +08:00
  Restore End Time     : --
  Restore Speed        : Low
  Restore Progress(%)  : 18
  Exposed To Initiator : Unmapped

System Response

The following table describes the parameter meanings.



Health Status

Health status of snapshot

Running Status

Running status of snapshot


World Wide Name (WWN) of snapshot

Time Stamp

Time stamp of snapshot

Restore Start Time

Restore start time of snapshot

Restore End Time

Restore end time of snapshot

Restore Speed

Restore speed of snapshot

Restore Progress(%)

Restore progress(%)

Exposed To Initiator

Mapped or not

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 317104

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next