No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show notification syslog

show notification syslog

Function

The show notification syslog command is used to query the settings of SYSLOG notification.

Format

show notification syslog

Parameters

None

Level

Guest

Usage Guidelines

None

Example

Query the settings of SYSLOG notification.

admin:/>show notification syslog
  Enabled                  : Yes 
  Alert Level              : Warning 
  Syslog Server IP         : 192.168.0.126
  Enable Alarm             : Yes
  Enable Recovery Alarm    : No
  Enable Event             : No
  Enabled Send System Name : Yes

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Enabled

Indicates whether the SYSLOG notification function is enabled.This function is disabled by default.

Alert Level

Indicates the lowest alarm severity required by SYSLOG notification to report an alarm.

Syslog Server IP

Indicates the IP address of the SYSLOG server.

Enable Alarm

Indicates whether the alarm SYSLOG notification function is enabled.This function is enabled by default.

Enable Recovery Alarm

Indicates whether the recovery alarm SYSLOG notification function is enabled.This function is disabled by default.

Enable Event

Indicates whether the event SYSLOG notification function is enabled.This function is disabled by default.

Enabled Send System Name

Indicates whether the storage system name is included in SYSLOGs.

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 235420

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next