No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ftds switch

change ftds switch

Function

The change ftds switch command is used to enable or disable the Flow Tracing & Diagnosing System (FTDS) tracing function. This command can set the main switch, or switches of tracing, phase, delay, and count functions.

Format

change ftds switch { switch=? | trace_switch=? | phase_switch=? | delay_switch=? | count_switch=? }

Parameters

Parameter

Description

Value

switch=? FTDS main switch.

The value can be "On" or "Off", where:

  • "On": turns on the FTDS main switch.
  • "Off": turns off the FTDS main switch.
trace_switch=? FTDS tracing switch.

The value can be "On" or "Off", where:

  • "On": turns on the FTDS tracing switch.
  • "Off": turns off the FTDS tracing switch.
phase_switch=? FTDS phase switch.

The value can be "On" or "Off", where:

  • "On": turns on the FTDS phase switch.
  • "Off": turns off the FTDS phase switch.
delay_switch=? FTDS delay switch.

The value can be "On" or "Off", where:

  • "On": turns on the FTDS delay switch.
  • "Off": turns off the FTDS delay switch.
count_switch=? FTDS count switch.

The value can be "On" or "Off", where:

  • "On": turns on the FTDS count switch.
  • "Off": turns off the FTDS count switch.

Level

Administrator

Usage Guidelines

The FTDS function is used to trace faults and diagnose the storage system and provides fault diagnosis and phase statistics.

Example

  • Turning on the FTDS main switch.

    admin:/>change ftds switch switch=On
    Command executed successfully.
  • Turning on the FTDS trace switch.

    admin:/>change ftds switch trace_switch=On
    Command executed successfully.
     
  • Turning on the FTDS phase switch.

    admin:/>change ftds switch phase_switch=On
    Command executed successfully.
     
  • Turning on the FTDS delay switch.

    admin:/>change ftds switch delay_switch=On
    Command executed successfully.
  • Turning on the FTDS count switch.

    admin:/>change ftds switch count_switch=On
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 236404

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next