No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete file_system general

delete file_system general

Function

The delete file_system general command is used to delete file systems.

Format

delete file_system general file_system_id_list=?

Parameters

Parameter

Description

Value

file_system_id_list=? Indicates the list of file system IDs.
  • Multiple IDs are separated by commas (,), or ID range separated by hyphens(-).
  • The ID is an integer between 0 and 65535.

Level

Administrator

Usage Guidelines

  • This command will delete the information about the file system from the system, and data in the file system will be lost.
  • Before running this command, ensure that you have selected correct file system, and services of the file system have been stopped.
  • If the file system has been shared, delete the share before running the command, otherwise the file system cannot the deleted.
  • This command does not support OceanStor 2200 V3 storage system.

Example

  • To delete the single file system, run the following command:

    admin:/>delete file_system general file_system_id_list=3
    DANGER: You are going to delete filesystem.This operation deletes the data stored on the filesystem.
    Suggestion: Before you perform this operation, ensure that the data on the filesystem has been backed up or is allowed to delete.
    Have you read danger alert message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Delete file system 3 successfully.
  • To delete multiple file systems, run the following command:

    admin:/>delete file_system general file_system_id_list=3,4 
    DANGER: You are going to delete filesystem.This operation deletes the data stored on the filesystem.
    Suggestion: Before you perform this operation, ensure that the data on the filesystem has been backed up or is allowed to delete.
    Have you read danger alert message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Delete file system 3 successfully.
    Delete file system 4 successfully.
    admin:/>
     

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 235197

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next