No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change fs_snapshot general

change fs_snapshot general

Function

The change fs_snapshot general command is used to change the name of a snapshot.

Format

change fs_snapshot general snapshot_id=? name=?

Parameters

Parameter

Description

Value

snapshot_id=? Indicates the ID of the snapshot whose name you want to change.

File system id @ snapshot name,the file system id is an integer between 0 and 65535,the snapshot name consists of 1 to 127 ASCII characters including letters, numbers, and underscores (_).

name=? Indicates the new name of the snapshot.

The value consists of 1 to 127 ASCII characters including letters, numbers, and underscores (_).

Level

Administrator

Usage Guidelines

  • Before running this command, check whether the ID of the snapshot is correct.
  • Before running this command, check whether the new name of the snapshot exists.
  • This command does not support OceanStor 2200 V3 storage system.

Example

To rename snapshot "snap0" "snapshot", run the following command:

admin:/>change fs_snapshot general snapshot_id=0@snap0 name=snapshot
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 240940

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next