No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show service http

show service http


The show service http command is used to show the HTTP configuration.


show service http





Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.


To show the HTTP configuration, run the following command.

admin:/>show service http
Running Status: Running
Max Connection: 100
Root Directory: /fsname/http
File System ID: 0
Enable Web Dav: Yes
Enable HTTP Port: No
Enable Auto Index: No

System Response

The following table describes the parameter meanings.



Running Status

The running status.

Max Connection

The max connection number.

Root Directory

The root directory of the HTTP service.

File System ID

The file system ID.

Enable Web Dav

The Web Dav status.

Enable HTTP Port

The HTTP port status.

Enable Auto Index

Indicates the status of the directory list function.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 315916

Downloads: 206

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next