No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create schedule monitor

create schedule monitor


The create schedule monitor command is used to create SmartTier I/O monitoring policies. The data recorded by I/O monitoring policies can be used as a reference for formulating data relocation policies.


create schedule monitor name=? pool_id=? period=? [ day_of_week=? ] [ start_time=? ] [ duration=? ]





name=? Name of an I/O monitoring policy.

The value contains 1 to 31 characters including digits, letters, underscores (_), hyphens (-), and periods (.).

pool_id=? ID of a storage pool that you want to monitor.

To obtain the value, run "show storage_pool general".

period=? The monitoring period.

The value can be:

  • "daily": The policy is executed daily.
  • "weekly": The policy is executed weekly.
day_of_week=? The day on which I/O monitoring will be cycled weekly. This parameter must be assigned and it is valid only when period=? is set to "weekly".

You can specify multiple days in a week and separate them with commas (,). The value can be "sun", "mon", "tue", "wed", "thu", "fri", or "sat", where:

  • "sun": indicates Sunday.
  • "mon": indicates Monday.
  • "tue": indicates Tuesday.
  • "wed": indicates Wednesday.
  • "thu": indicates Thursday.
  • "fri": indicates Friday.
  • "sat": indicates Saturday.
start_time=? The time from which I/O monitoring will be started on a specific day in a week.

The value is in the format of HH:MM. The value ranges from 00:00 to 23:59.

The default value is "00:00".

duration=? The monitoring duration.

The value is in the format of HH:MM or H:M. The value ranges from 00:30 to 24:00.

The default value is "24:00".



Usage Guidelines

  • The prerequisite for running this command is that the selected storage pool contains at least two storage tiers.
  • I/O monitoring policies will regularly analyze the data stored in different tiers of the storage pool, and the resulted data will be used as a substantial reference for formulating data relocation policies.


To create an I/O monitoring policy in storage pool "2", where the name of the policy is "newmonitor", and the policy will be started from "00:00" and lasts for "30" minutes on each Monday, run the following command:

admin:/>create schedule monitor name=newmonitor pool_id=2 period=weekly day_of_week=mon start_time=00:00 duration=00:30
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 317142

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next