No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file_system file_handle

show file_system file_handle


The show file_system file_handle command is used to query information about handles on a controller.


show file_system file_handle [ controller=? ] [ file_system_id=? ] [ show_count=? ]





controller=? Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

file_system_id=? File system ID.

To obtain the value, run the "show file_system general" command without parameters.

show_count=? Whether the total number of handles is displayed.

The value can be "yes" or "no", where:

  • "yes": queries the total number of handles.
  • "no": queries information about handles on each file system.



Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.


  • Query information about handles on controller "0A".

    admin:/>show file_system file_handle controller=0A
    Controller File System ID File Handle Count 
     ---------- -------------- ----------------- 
     0A         3              2 
     0A         2              2 
     0A         1              6
  • Query the total number of handles on controller "0A".

    admin:/>show file_system file_handle controller=0A show_count=yes
    Controller : 0A 
     Used File Handle Count : 8 
     Total File Handle Count : 600000
  • Query information about handles on file system "1" of controller "0A".

    admin:/>show file_system file_handle controller=0A file_system_id=1
    Controller : 0A 
     File System ID : 1 
     File Handle Count : 6

System Response

The following table describes the parameter meanings.




Controller ID.

File System ID

File system ID.

File Handle Count

Number of handles on a file system.

Used File Handle Count

Number of used handles.

Total File Handle Count

Maximum number of handles.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 365964

Downloads: 240

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next